The Nest Thermostat is a well-liked sensible thermostat that may allow you to get monetary savings in your power payments. It is simple to put in and use, but when you’ll want to take it off the wall for any purpose, this is the way to do it. First, you will want to show off the ability to the thermostat. You are able to do this by flipping the breaker that controls the ability to your HVAC system. As soon as the ability is off, you possibly can take away the faceplate of the thermostat by gently pulling it straight in direction of you.
As soon as the faceplate is off, you will see 4 screws that maintain the thermostat to the wall. Use a screwdriver to take away these screws, after which fastidiously carry the thermostat off the wall. Watch out to not harm the wires which are related to the thermostat. If you’ll want to disconnect the wires, merely unscrew the wire nuts that maintain them in place. As soon as the wires are disconnected, you possibly can take away the thermostat from the wall.
When you’re having hassle eradicating the thermostat from the wall, do not drive it. You might have to name a certified electrician that will help you. As soon as the thermostat is off the wall, you possibly can clear it or change it with a brand new one. To reinstall the thermostat, merely reverse the steps that you just took to take away it. Remember to tighten the screws that maintain the thermostat to the wall, and switch the ability again on to your HVAC system.
Eradicating the Faceplate
Earlier than you start, energy down your thermostat by flipping the breaker or eradicating the batteries. This may stop any electrical shocks or harm to the system.
As soon as the ability is off, gently grasp the faceplate of the thermostat along with your fingers. There ought to be a small notch or indentation on one facet of the faceplate, normally close to the underside. Place your fingernail or a skinny object into this notch and thoroughly pry upwards.
As you pry upwards, the faceplate ought to come free from the bottom. Proceed prying gently till the faceplate is totally indifferent from the thermostat. Watch out to not use extreme drive, as this might harm the faceplate or the thermostat itself.
As soon as the faceplate is eliminated, you’ll have entry to the thermostat’s wires and terminals. Remember to label every wire earlier than disconnecting it, so to reconnect every little thing appropriately afterward.
To take away the thermostat from the wall, merely unscrew the mounting screws which are positioned on both facet of the bottom. As soon as the screws are eliminated, the thermostat might be fastidiously lifted off the wall.
| 1. Energy down the thermostat |
| 2. Find the notch or indentation on the faceplate |
| 3. Fastidiously pry upwards along with your fingernail or a skinny object |
| 4. Proceed prying till the faceplate is totally indifferent |
Disconnecting the Wires
1. Flip off the ability to your Nest thermostat on the breaker. This may stop any electrical shock when you are working.
2. Fastidiously take away the faceplate of your Nest thermostat. To do that, gently pry the faceplate off with a flat-head screwdriver or the same device. Watch out to not harm the faceplate or the thermostat itself.
3. As soon as the faceplate is eliminated, you will note the wires which are related to your Nest thermostat. These wires are sometimes color-coded, with crimson wires indicating energy, inexperienced wires indicating floor, and yellow wires indicating warmth.
4. Use a small screwdriver to loosen the screws which are holding the wires in place. Watch out to not over-tighten the screws, as this might harm the wires.
5. As soon as the screws are free, gently pull the wires out of the terminals. Watch out to not pull too exhausting, as this might harm the wires or the thermostat.
6. As soon as all the wires are disconnected, you possibly can fastidiously take away your Nest thermostat from the wall.
**Here’s a desk that summarizes the steps for disconnecting the wires out of your Nest thermostat:**
| Step | Motion |
|---|---|
| 1 | Flip off the ability to your Nest thermostat on the breaker. |
| 2 | Fastidiously take away the faceplate of your Nest thermostat. |
| 3 | Find the wires which are related to your Nest thermostat. |
| 4 | Use a small screwdriver to loosen the screws which are holding the wires in place. |
| 5 | Gently pull the wires out of the terminals. |
| 6 | Fastidiously take away your Nest thermostat from the wall. |
Detaching the Base Plate
As soon as the Nest thermostat has been totally indifferent from the wall, you’ll want to proceed to separate its base plate from the sub-base by following these detailed steps.
Find the Launch Button
Step one is to establish the discharge button on the bottom plate. This button is usually positioned on the underside or facet of the plate and could also be labeled with a logo or the phrase “launch.” Discover this launch button and gently press on it.
Detach the Base Plate
As soon as the discharge button has been pressed, fastidiously carry the bottom plate upwards, away from the sub-base. The bottom plate ought to come off simply with minimal drive. Remember to maintain onto each the bottom plate and the sub-base to forestall them from falling or getting broken.
Disconnect the Wires
After the bottom plate has been eliminated, you will note a number of wires related to the sub-base. These wires are sometimes color-coded and could also be labeled for simple identification. Earlier than disconnecting the wires, take an image of the wiring configuration for reference later when reconnecting the thermostat.
To disconnect the wires, gently pull them straight out of the corresponding terminals on the sub-base. Don’t pull on the wires themselves, however moderately on the plastic connectors on the finish of the wires.
| Shade | Perform |
|---|---|
| Purple | Energy (24V) |
| Inexperienced | Fan |
| Yellow | Heating (stage 1) |
| White | Heating (stage 2) |
| Blue | Cooling (stage 1) |
| Orange | Cooling (stage 2) |
Figuring out the Sort of Wall Plate
Earlier than eradicating your Nest thermostat from the wall, it is essential to establish the kind of wall plate you may have. Totally different fashions of Nest thermostats could require completely different wall plates. Observe these steps to find out the kind of wall plate you may have:
- Take away the faceplate: Gently pull the faceplate of your Nest thermostat away from the wall plate.
- Test the again of the faceplate: Look at the again of the faceplate for any markings or labels that point out the wall plate sort.
- Examine the wall plate: Search for bodily traits on the wall plate itself that will point out the sort, akin to the form, dimension, and variety of holes or slots.
- Consult with the Nest consumer guide: When you can not establish the wall plate sort by inspection, seek the advice of your Nest thermostat’s consumer guide, which can present particular directions for various wall plate varieties.
- Flip off the ability to the thermostat. This may be achieved by flipping the circuit breaker or eradicating the fuse that provides energy to the thermostat.
- Take away the faceplate of the thermostat. That is normally achieved by gently pulling on the faceplate till it pops off.
- Unscrew the 2 screws that maintain the wall plate in place. These screws are sometimes positioned on the prime and backside of the wall plate.
- Pull the wall plate straight off the wall. Watch out to not harm the wires which are related to the thermostat.
- Disconnect the wires from the thermostat. The wires are sometimes related to the thermostat utilizing screw terminals. To disconnect the wires, merely loosen the screws and pull the wires off the terminals. Remember to notice which wire is related to which terminal so to reconnect them appropriately whenever you set up the brand new thermostat.
- Ensure that the wires are securely related to the thermostat. If the wires usually are not related correctly, the thermostat won’t work correctly.
- Use a wire nut to attach the wires collectively. This may assist to forestall the wires from coming free.
- Check the thermostat to make it possible for it’s working correctly. To do that, activate the thermostat and set the temperature. The thermostat ought to activate the heating or cooling system to succeed in the specified temperature.
- Gently pull the faceplate straight towards you to detach it from the bottom.
- Align the brand new faceplate with the bottom and gently snap it into place.
- Be certain that the faceplate is securely connected and sits flush in opposition to the bottom.
- Deal with the faceplate with care to keep away from damaging the sensors or show.
- If the faceplate is caught or troublesome to take away, apply light strain and wiggle it barely to loosen it.
- Make sure that the brand new faceplate is the right dimension and shade to your Nest thermostat mannequin.
- As soon as the faceplate is changed, verify if the thermostat is functioning correctly by adjusting the temperature and observing the show.
- When you expertise any points with changing the faceplate, check with the Nest assist web site or contact Nest buyer assist for help.
- Flip off the ability to the thermostat on the breaker or fuse field.
- Take away the faceplate of the thermostat by gently pulling it straight in direction of you.
- Find the 2 screws which are holding the thermostat to the wall plate. Take away these screws.
- Gently pull the thermostat straight off the wall plate.
- Press the ring on the entrance of the thermostat to wake it up.
- Swipe down from the highest of the display and faucet on the Settings icon.
- Scroll down and faucet on Reset.
- Faucet on Manufacturing facility reset.
- Enter your thermostat’s PIN.
- Faucet on Reset.
- Flip off the ability to the thermostat on the breaker or fuse field.
- Take away the faceplate of the thermostat by gently pulling it straight in direction of you.
- Find the 2 AA batteries which are positioned on the again of the thermostat. Take away the batteries by gently pulling them out.
- Insert two new AA batteries into the thermostat, ensuring that the constructive and detrimental terminals are aligned appropriately.
- Reattach the faceplate to the thermostat.
- Flip the ability again on on the breaker or fuse field.
Most Nest thermostats are suitable with a number of varieties of wall plates, together with the next:
| Wall Plate Sort | Appropriate Nest Thermostats |
|---|---|
| Spherical Wall Plate | Nest Studying Thermostat, Nest Thermostat E, Nest Thermostat |
| Sq. Wall Plate | Nest Thermostat E, Nest Thermostat |
Eradicating the Previous Wall Plate
To take away the previous wall plate, comply with these steps:
| Wire Shade | Terminal |
|---|---|
| Purple | R |
| White | W |
| Inexperienced | G |
| Yellow | Y |
Putting in the New Wall Plate
As soon as the previous wall plate is eliminated, it is time to set up the brand new one. Here is a step-by-step information:
1. Take away the previous wires from the terminal screws.
Utilizing a screwdriver, gently unscrew the terminal screws and take away the wires from them. Be aware the place of every wire so you possibly can reconnect them correctly later.
2. Join the wires to the brand new wall plate.
Match the wires to the corresponding terminals on the brand new wall plate and insert them into the screw terminals. Tighten the screws to safe the wires.
The terminals are normally color-coded to make it simpler to establish the place every wire goes. Here is a standard color-coding scheme:
| Shade | Wire |
|---|---|
| Purple | Energy (R) |
| White | Frequent (C) |
| Yellow | Warmth (W) |
| Blue | Cool (Y) |
| Brown | Fan (G) |
3. Mount the brand new wall plate to the wall.
Align the brand new wall plate over the mounting bracket and press it firmly into place. Be certain that it snaps securely into place.
4. Screw within the mounting screws.
Use the offered screws to safe the wall plate to the mounting bracket. Tighten the screws till they’re comfortable however keep away from overtightening.
5. Join the thermostat to the wall plate.
Align the thermostat with the wall plate and press it firmly into place. The thermostat ought to snap securely onto the wall plate.
6. Check the thermostat.
Activate the ability and verify if the thermostat is functioning correctly. Regulate the temperature and fan settings to verify it responds as anticipated. If there are any points, recheck the wiring and connections till you resolve them.
Step 1: Unmount the Thermostat
Gently pull the thermostat away from the bottom plate. It ought to come off simply, but when it does not, use a flathead screwdriver to fastidiously pry it free.
Step 2: Take away the Wires
As soon as the thermostat is indifferent, you will see a number of wires connected to the bottom plate. Be aware the place of every wire and thoroughly disconnect them.
Step 3: Unscrew the Base Plate
Find the 2 screws that maintain the bottom plate in place. Use a screwdriver to unscrew them.
Step 4: Pull the Base Plate Away
As soon as the screws are eliminated, fastidiously pull the bottom plate away from the wall. It could be connected with adhesive, so use a mild prying movement if mandatory.
Step 5: Reattach the Wires
Reconnect the wires to the bottom plate, guaranteeing that they’re securely mounted.
Step 6: Mount the Base Plate
Place the bottom plate again in opposition to the wall and screw it into place. Make sure that it’s stage and firmly connected.
Step 7: Reattach the Thermostat
Slide the thermostat again onto the bottom plate till it clicks into place. The thermostat ought to now be securely mounted on the wall.
Reattaching the Base Plate
To reattach the bottom plate, comply with these steps:
| Step | Motion |
|---|---|
| 1 | Take away the 2 screws that maintain the bottom plate in place. |
| 2 | Fastidiously pull the bottom plate away from the wall. |
| 3 | Reconnect the wires to the bottom plate. |
| 4 | Place the bottom plate again in opposition to the wall and screw it into place. |
As soon as the bottom plate is reattached, you possibly can slide the thermostat again onto it till it clicks into place.
Reconnecting the Wires
Earlier than you take away the thermostat from the wall, you’ll want to disconnect the wires which are related to it. To do that, use a small screwdriver to loosen the screws that maintain the wires in place. As soon as the screws are free, you possibly can pull the wires out of the thermostat.
Watch out to not lose observe of which wire goes the place. You should utilize a bit of tape to label every wire earlier than you disconnect it.
After you have disconnected all the wires, you possibly can take away the thermostat from the wall. To do that, merely pull the thermostat straight off of the wall plate.
Listed here are some further suggestions for reconnecting the wires to the thermostat:
| Wire Shade | Terminal |
|---|---|
| Purple | R |
| White | W |
| Inexperienced | G |
| Yellow | Y |
| Blue | C |
| Orange | O/B |
Changing the Faceplate
The Nest thermostat faceplate is magnetically connected to the bottom, making it simple to take away and change. To switch the faceplate, comply with these steps:
Further Notes for Changing the Faceplate:
| Instrument Required |
|---|
| None |
Please notice that the steps for changing the Nest thermostat faceplate could range barely relying in your particular mannequin. Consult with the consumer guide or on-line documentation to your specific system for detailed directions.
Flip Off Energy on the Circuit Breaker
Step one is to show off the ability to the thermostat on the circuit breaker. This may stop any electrical shock hazard when you are engaged on the thermostat.
Take away the Faceplate
The faceplate is the entrance cowl of the thermostat that shows the temperature and different settings. To take away the faceplate, gently pull it straight in direction of you. It ought to come off simply.
Disconnect the Wires
As soon as the faceplate is eliminated, you will note the wires which are related to the thermostat. These wires are sometimes color-coded, but when they aren’t, make sure you label them so to reconnect them appropriately afterward.
Take away the Mounting Plate
The mounting plate is the metallic plate that’s connected to the wall and holds the thermostat in place. To take away the mounting plate, unscrew the screws which are holding it in place.
Pull the Thermostat Straight Down
As soon as the mounting plate is eliminated, you possibly can pull the thermostat straight all the way down to take away it from the wall.
Troubleshooting Frequent Points
The thermostat will not be responding
If the thermostat will not be responding, verify to make it possible for the ability is turned on on the circuit breaker. If the ability is on, strive resetting the thermostat by urgent the reset button. If the thermostat nonetheless doesn’t reply, it might must be changed.
The thermostat is displaying an error message
If the thermostat is displaying an error message, verify the consumer guide to see what the error message means. The error message could present directions on the way to repair the issue.
The thermostat will not be heating or cooling correctly
If the thermostat will not be heating or cooling correctly, verify to make it possible for the thermostat is about to the right mode. The thermostat can also be in want of calibration. To calibrate the thermostat, comply with the directions within the consumer guide.
The thermostat is making a noise
If the thermostat is making a noise, it might be attributable to a free wire or a defective element. Test the wires to make it possible for they’re all related securely. If the wires are all related securely, the thermostat could must be changed.
The thermostat will not be connecting to the Wi-Fi community
If the thermostat will not be connecting to the Wi-Fi community, verify to make it possible for the Wi-Fi community is working correctly. It’s also possible to strive resetting the thermostat by urgent the reset button. If the thermostat nonetheless doesn’t connect with the Wi-Fi community, it might must be changed.
How To Take A Nest Thermostat Off The Wall
To take a Nest thermostat off the wall, you will have to do the next:
As soon as the thermostat is off the wall, you possibly can disconnect the wires from the again of the thermostat. Remember to be aware of which wire goes to which terminal, so to reconnect them appropriately whenever you reattach the thermostat.
To reattach the thermostat, merely reverse the steps above. Remember to tighten the screws that maintain the thermostat to the wall plate, and switch the ability again on on the breaker or fuse field.
