Think about the comfort of effortlessly sliding your Ford seat forwards and backwards to accommodate totally different drivers or cargo wants. Putting in an additional Ford seat L observe can remodel your automobile right into a haven of customizable consolation and flexibility. This complete information will empower you with step-by-step directions, making certain a seamless and profitable set up. Whether or not you are a seasoned mechanic or an adventurous DIY fanatic, put together to boost your driving expertise with this useful improve. Embark on this journey to unlock the complete potential of your Ford seat’s mobility and personalization.
Earlier than delving into the set up course of, let’s collect the important instruments and supplies. You will want a set of metric wrenches, a socket set, a drill, drill bits, self-tapping screws, and naturally, the additional Ford seat L observe. Together with your arsenal of sources prepared, you possibly can proceed with confidence. Step one entails eradicating the present seat out of your automobile. Rigorously disconnect the wiring harness and unbolt the seat from its mounting factors. As soon as the seat is eliminated, you will have clear entry to the world the place the additional L observe will probably be put in.
Now comes the exact set up of the additional Ford seat L observe. Place the L observe onto the seat base and align it precisely with the present observe. Safe the L observe firmly utilizing the supplied self-tapping screws. Make sure the screws are adequately tightened to forestall any motion or rattling throughout use. As soon as the L observe is securely mounted, rigorously reinstall the seat into your automobile. Reconnect the wiring harness and bolt the seat again into its authentic place. With these steps meticulously adopted, you have efficiently put in the additional Ford seat L observe, increasing the vary of seat changes and elevating your driving consolation to new heights.
Finding the Current L Observe
To start, find the present L observe in your Ford automobile. That is the observe that the seat rails slide forwards and backwards on. It’s sometimes positioned underneath the seat, and it might be lined by a plastic or metallic trim panel. In case you are having hassle discovering the L observe, seek the advice of your automobile’s proprietor’s handbook or seek for diagrams on-line.
Upon getting positioned the present L observe, you will have to find out how a lot further observe you could set up. This may rely upon the kind of seat you might be putting in and the quantity of adjustment you need. Typically talking, you will have so as to add at the very least 12 inches of observe to every facet of the seat.
Here’s a desk of measurements and solutions for a way a lot further L observe you might want:
| Seat Sort | Further L Observe Wanted |
|---|---|
| Commonplace bench seat | 12 inches per facet |
| Bucket seat | 18 inches per facet |
| Racing seat | 24 inches per facet |
Upon getting decided how a lot further observe you want, you should purchase the suitable observe on-line or out of your native auto components retailer.Assembling the Further L Observe
Step 1: Collect Supplies
You will have the next supplies:
- Further L observe
- L observe mounting bolts
- Socket wrench
Step 2: Put together the L Observe
Measure and mark the places for the mounting bolts on the L observe. Drill pilot holes for the bolts utilizing a drill bit that’s barely smaller than the bolts.
Step 3: Set up the Mounting Bolts
Insert the mounting bolts into the pilot holes and tighten them utilizing the socket wrench. Be sure that the bolts are tightened securely, however don’t overtighten them.
| Tightening Torque | Bolt Measurement |
|---|---|
| 10-12 ft-lbs | 1/4-20 bolts |
| 15-18 ft-lbs | 5/16-18 bolts |
| 20-25 ft-lbs | 3/8-16 bolts |
Step 4: Connect the L Observe to the Car
Align the L observe with the mounting holes on the automobile. Insert the mounting bolts into the holes and tighten them utilizing the socket wrench. Be sure that the L observe is securely connected.
Aligning and Attaching the L Observe
As soon as the L observe is minimize to the right size, it is very important align it correctly earlier than attaching it to the ground. Use the next steps to make sure correct alignment:
- Place the L observe on the ground alongside the specified alignment.
- Test for alignment utilizing a measuring tape or straightedge to make sure it’s parallel to the automobile’s body.
- Mark the situation of the mounting holes utilizing a pencil or marker.
For safe attachment, use the next process:
- Drill pilot holes on the marked places utilizing a drill bit that’s barely smaller than the diameter of the mounting bolts.
- Align the L observe with the pilot holes and insert the mounting bolts.
- Tighten the bolts utilizing a wrench or socket, making certain they’re securely mounted.
| Materials | Amount | Size |
|---|---|---|
| L Observe | 2 | As per automobile necessities |
| Mounting Bolts | 8-10 (per L observe) | 1/2 inch |
| Drill Bit | 1 | 1/4 inch |
| Measuring Tape | 1 | N/A |
| Wrench or Socket | 1 | N/A |
Tightening the Carriage Bolts
That is the ultimate step within the set up course of. As soon as the bolts are tightened, the seat will probably be securely mounted to the L-track. To tighten the bolts, you will have a socket wrench or a field wrench. Begin by tightening the bolts finger-tight. As soon as the bolts are finger-tight, use the wrench to tighten them additional. Watch out to not overtighten the bolts, as this may injury the threads.
Here’s a desk summarizing the steps for tightening the carriage bolts:
| Step | Directions |
|---|---|
| 1 | Tighten the bolts finger-tight. |
| 2 | Use a wrench to tighten the bolts additional. |
| 3 | Watch out to not overtighten the bolts. |
Reinforcing the L Observe
Reinforcing the L observe is a necessary step to make sure the steadiness and sturdiness of your aftermarket seat set up. This is an in depth information that will help you reinforce the L observe:
Supplies Required
| Element | Amount |
|---|---|
| 1/4″ x 1″ Metal Flat Bar | 2 |
| 1/4″ Bolts | 8 |
| Washers | 8 |
| Nuts | 8 |
Process
- Find Reinforcement Factors: Discover the present weld nuts or mounting factors on the automobile’s ground the place the unique seat observe was connected. These factors will function the reinforcement factors.
- Measure and Reduce Flat Bars: Reduce two items of 1/4" x 1" metal flat bar to a size that corresponds to the within width of the automobile’s ground.
- Place Flat Bars: Place the flat bars alongside the within fringe of the ground, parallel to the present L observe. Be sure that they align with the reinforcement factors.
- Safe Flat Bars: Utilizing 1/4" bolts, washers, and nuts, bolt the flat bars to the reinforcement factors. Tighten the bolts securely.
- Connect to L Observe: Place the L observe over the flat bars and safe it utilizing bolts, washers, and nuts. Tighten the bolts to the really helpful torque specs.
- Further Issues: In sure circumstances, akin to for heavy-duty functions or for putting in aftermarket seats with a big weight capability, you might want so as to add further assist by welding the flat bars to the automobile’s ground. Seek the advice of with a professional automotive skilled for correct welding directions.
Putting in the Seat on the L Observe
As soon as the L observe is put in, you possibly can start putting in the seat. To do that, you will have to:
- Align the seat with the L observe. Make it possible for the seat is dealing with the right path and that the entrance of the seat is aligned with the entrance of the L observe.
- Elevate the seat onto the L observe. Rigorously carry the seat onto the L observe and be sure that it’s securely seated.
- Slide the seat ahead and backward. Slide the seat ahead and backward to be sure that it strikes easily alongside the L observe.
- Tighten the seat bolts. Tighten the seat bolts to safe the seat to the L observe.
- Reinstall the seat covers. Reinstall the seat covers to cowl the seat bolts and provides the seat a completed look.
6. Alter the Seat Place
As soon as the seat is put in, you possibly can alter the seat place to your liking. To do that, you should use the seat adjustment levers to maneuver the seat ahead and backward, up and down, and tilt the seatback.
7. Set up the Seat {Hardware}
The ultimate step is to put in the seat {hardware}. This contains putting in the seat belt buckles, the seat belt retractors, and the seat belt anchors. The seat {hardware} is often included with the seat, however you might must buy it individually in case you are putting in an aftermarket seat.
Putting in the Seat Belt Buckles
To put in the seat belt buckles, you will have to:
Putting in the Seat Belt Retractors
To put in the seat belt retractors, you will have to:
Adjusting the Seat Place
To regulate the seat place, observe these steps:
- Find the seat adjustment levers. These are often positioned on the facet of the seat.
- Pull the lever ahead to maneuver the seat ahead.
- Push the lever again to maneuver the seat again.
- Elevate or decrease the seat cushion. To do that, pull up on the lever positioned on the entrance of the seat cushion.
- Tilt the seatback ahead or backward. To do that, pull up on the lever positioned on the rear of the seatback.
- Alter the lumbar assist. To do that, flip the knob positioned on the facet of the seat.
- Alter the headrest. To do that, pull up on the lever positioned on the prime of the headrest.
- Save your seat place. To do that, press the “M” button on the seat adjustment panel.
Here’s a desk that summarizes the seat adjustment options:
| Function | Alter |
|---|---|
| Transfer seat ahead | Pull lever ahead |
| Transfer seat again | Push lever again |
| Elevate or decrease seat cushion | Pull up on lever at entrance of seat cushion |
| Tilt seatback ahead or backward | Pull up on lever at rear of seatback |
| Alter lumbar assist | Flip knob on facet of seat |
| Alter headrest | Pull up on lever at prime of headrest |
| Save seat place | Press “M” button on seat adjustment panel |
Security Precautions
Earlier than embarking on the set up course of, it’s crucial to prioritize security by adhering to the next precautions:
- Put on Protecting Gear: Don security glasses, gloves, and closed-toe sneakers to attenuate the danger of damage.
- Disconnect the Battery: Disconnect the unfavorable terminal of your battery to forestall electrical hazards through the set up.
- Park on a Stage Floor: Park your automobile on a flat, steady floor to make sure it stays stationary all through the method.
- Assist the Seat: Make the most of a jack stand or different appropriate assist to forestall the seat from falling whereas disconnected.
- Use Correct Instruments: Make use of the suitable instruments for every job, together with a socket wrench, torque wrench, and drill.
- Comply with Directions Rigorously: Consult with the producer’s directions or a good on-line information to make sure correct set up.
- Test Tightness Repeatedly: As soon as put in, periodically verify the tightness of all bolts and screws to keep up security.
- Safe L Observe: Make sure the L observe is securely connected to the ground or brackets utilizing the required bolts and torque settings.
- Reattach Seat: Rigorously reattach the seat to the L observe, making certain it slides easily and locks into place securely.
9. Test Alignment and Tighten Bolts
Examine the alignment of the newly put in L observe to make sure it’s parallel to the present observe. Use a measuring tape or ruler to confirm the distances and angles. Tighten all bolts and screws to the required torque values utilizing a torque wrench. This step ensures the L observe stays firmly in place and the seat might be adjusted easily and safely.
Troubleshooting Widespread Points
If you happen to encounter any points whereas putting in the additional Ford seat L observe, verify the next troubleshooting steps:
1. Observe Alignment
Be sure that the brand new L observe is correctly aligned with the present one. Misalignment can forestall the seats from sliding easily.
2. Bolt Tightening
Confirm that each one bolts are securely tightened. Free bolts could cause rattling and instability.
3. Particles Elimination
Examine the observe for any particles or dust. Clear it completely to forestall interference with seat motion.
4. Seat Compatibility
Verify that the seats you propose to make use of are suitable with the L observe system. Incompatible seats might not match accurately.
5. Rail Extension
If you could prolong the observe size, use suitable rail extension brackets. Improper extension can weaken the observe power.
6. Lubrication
Apply a skinny layer of lubricant to the observe to cut back friction and enhance seat sliding.
7. Wiring Obstructions
Be sure that there are not any wiring harnesses or cables obstructing the observe path. Keep away from injury throughout set up.
8. Security Precautions
At all times put on security glasses and gloves. Use correct lifting strategies to keep away from damage.
9. Instrument Necessities
Have all essential instruments out there, together with a socket wrench, drill, and acceptable fasteners.
10. Search Skilled Help
If you happen to encounter any persistent points or have any considerations, don’t hesitate to hunt skilled help from an skilled mechanic.
How To Set up Further Ford Seat L Observe
To put in further Ford seat L observe, you will have the next instruments and supplies:
- Socket wrench
- 10mm socket
- 13mm socket
- 15mm socket
- 18mm socket
- T40 Torx bit
- Flathead screwdriver
- Phillips head screwdriver
- New seat L observe
- Bolts (4x M10x1.5, 4x M12x1.75, 4x M14x2.0)
- Washers (4x M10, 4x M12, 4x M14)
- Lock nuts (4x M10, 4x M12, 4x M14)
Upon getting gathered all the essential instruments and supplies, you possibly can observe these steps to put in the brand new seat L observe:
1. Take away the previous seat L observe. To do that, you will have to take away the 4 bolts that safe the seat L observe to the seat body. As soon as the bolts are eliminated, you possibly can carry the seat L observe off of the seat body.
2. Clear the seat body. As soon as the previous seat L observe is eliminated, you will have to scrub the seat body. This may assist to make sure that the brand new seat L observe is put in correctly.
3. Set up the brand new seat L observe. To do that, you will have to put the brand new seat L observe on the seat body. Make it possible for the brand new seat L observe is aligned correctly.
4. Safe the brand new seat L observe. As soon as the brand new seat L observe is aligned correctly, you will have to safe it to the seat body. To do that, you will have to insert the 4 bolts into the holes within the seat L observe and tighten them till they’re comfortable.
5. Check the brand new seat L observe. As soon as the brand new seat L observe is put in, you will have to check it to be sure that it’s working correctly. To do that, you will have to sit down within the seat and transfer the seat forwards and backwards. The seat ought to transfer easily and simply.
Individuals Additionally Ask
What’s a seat L observe?
A seat L observe is a metallic observe that’s mounted to the seat body. The seat L observe permits the seat to maneuver forwards and backwards.
How do I do know if I would like to switch my seat L observe?
In case your seat is just not shifting easily or simply, it might be essential to switch the seat L observe.
How a lot does it value to switch a seat L observe?
The fee to switch a seat L observe will differ relying on the make and mannequin of your automobile. Nevertheless, you possibly can count on to pay between $100 and $300 for the components and labor.
