In case your furnace has a pilot mild, it’s possible you’ll must relight it infrequently. It is a comparatively easy process that you are able to do your self. Nevertheless, you will need to comply with the steps fastidiously to keep away from any accidents.
Earlier than you begin, ensure that the furnace is turned off. You must also open a window or door to make sure that there may be loads of air flow. Then, find the pilot mild meeting. That is normally a small, steel tube with a flame burning inside. There will likely be a knob or lever that you need to use to show the fuel on and off.
Upon getting positioned the pilot mild meeting, it’s worthwhile to flip the fuel on. To do that, flip the knob or lever clockwise till you hear a click on. You may additionally must press a button to ignite the flame. As soon as the flame is lit, you possibly can regulate the knob or lever to regulate the dimensions of the flame.
Figuring out the Pilot Mild
Finding the pilot mild in your furnace is crucial earlier than making an attempt to mild it. Here is an in depth information that will help you establish the pilot mild:
- Find the Furnace: The furnace is often positioned within the basement, utility room, or attic. It is normally a big steel field with pipes and wires connected.
- Entry the Burner Meeting: Open the entry panel or door on the furnace to show the burner meeting. That is the place the pilot mild is often positioned.
- Determine the Pilot Mild: The pilot mild is normally a small, flame-like burner on the base of the burner meeting. It could be positioned subsequent to a fuel valve or igniter change.
- Distinguish from Different Flames: Should you see a number of flames within the burner meeting, be sure to establish the proper one. The pilot mild is often the smallest and most regular flame.
- Verify for a “P” Marking: Some pilot lights have a “P” image or marking etched on them to assist establish them simply.
| Search for a small, blue flame. |
| Verify the placement close to a fuel valve or igniter change. |
| Distinguish from bigger, flickering flames. |
| Verify for a “P” marking on the pilot mild. |
Finding the Gasoline Valve
To find the fuel valve in your furnace, comply with these steps:
-
Discover the furnace.
The furnace is normally positioned in a basement, attic, or utility closet. It’s a massive steel field with a blower fan and a burner. -
Search for the fuel line.
The fuel line is a steel pipe that runs to the furnace. It will likely be linked to a valve on the facet of the furnace. -
Determine the fuel valve.
The fuel valve is a small, brass-colored valve that’s positioned on the fuel line. It would have a lever or a deal with that you need to use to show it on and off.
| Sort of Gasoline Valve | Location |
|---|---|
| Handbook Gasoline Valve | On the fuel line, close to the furnace |
| Computerized Gasoline Valve | Contained in the furnace, close to the burner |
Turning Off the Gasoline Provide
Earlier than you start working in your furnace, it is important to show off the fuel provide. This can forestall any fuel from leaking out and probably inflicting a hearth or explosion.
To show off the fuel provide, comply with these steps:
- Find the fuel valve. It is usually positioned close to the furnace or on the fuel line main into the furnace.
- Flip the fuel valve to the “off” place. That is normally finished by turning the valve clockwise.
- Verify the fuel line for any leaks. To do that, apply a soapy water resolution to the fuel line. Should you see any bubbles forming, there is a leak. Restore the leak earlier than continuing.
As soon as you’ve got turned off the fuel provide, you possibly can safely proceed with lighting the pilot in your furnace.
| Gasoline Valve Place | Description |
|---|---|
| Open | Permits fuel to move via the valve |
| Closed | Prevents fuel from flowing via the valve |
Lighting the Pilot with a Match
To mild the pilot in your furnace with a match, comply with these steps:
-
Collect your supplies.
You’ll need a lighter or match, a long-handled lighter or match holder, and a screwdriver (elective).
-
Find the pilot mild meeting.
The pilot mild meeting is normally positioned on the underside of the furnace. It would have a small, spherical window and a fuel valve.
-
Flip off the fuel provide.
Find the fuel valve on the fuel line resulting in the furnace. Flip the valve clockwise to show off the fuel provide.
-
Mild the pilot mild.
-
Utilizing a long-handled lighter or match holder, mild a match or lighter.
-
Maintain the flame close to the pilot mild meeting.
The pilot mild ought to ignite inside a couple of seconds.
-
If the pilot mild doesn’t ignite, repeat steps 4a and 4b.
If the pilot mild nonetheless doesn’t ignite, it’s possible you’ll want to make use of a screwdriver to regulate the fuel valve. Flip the valve counterclockwise barely to extend the fuel move.
-
-
Activate the fuel provide.
As soon as the pilot mild is lit, flip the fuel valve counterclockwise to activate the fuel provide.
-
Modify the pilot mild flame.
The pilot mild flame needs to be about 1/2 inch lengthy. If the flame is simply too lengthy, it could trigger the furnace to overheat. If the flame is simply too quick, it could exit.
-
Reassemble the furnace.
As soon as the pilot mild is lit and adjusted, reassemble the furnace by closing the entry panel.
Lighting the Pilot with an Digital Igniter
In case your furnace has an digital igniter, lighting the pilot is a comparatively easy course of. Listed below are the steps it’s worthwhile to comply with:
1. Flip Off Gasoline Provide
Earlier than you begin, flip off the fuel provide to the furnace. That is normally finished by turning a valve positioned on the fuel line.
2. Discover the Pilot Meeting
The pilot meeting is often positioned close to the underside of the furnace. It would have a small, spherical window via which you’ll see the pilot flame.
3. Flip the Igniter Swap to “On”
Find the igniter change on the furnace. It would normally be a small, crimson or black button. Flip the change to the “On” place.
4. Press and Maintain the Reset Button
As soon as the igniter change is turned on, press and maintain the reset button. This button is normally positioned close to the igniter change. Maintain the button for about 30 seconds.
5. Observe the Pilot Flame
After about 30 seconds, it’s best to see the pilot flame ignite. If the flame doesn’t ignite, wait a couple of minutes and check out once more. If the flame nonetheless doesn’t ignite, there could also be an issue with the igniter or the fuel provide. Contact a certified technician for help.
As soon as the pilot flame is ignited, launch the reset button. The flame ought to stay lit, and the furnace ought to begin heating.
Here’s a desk summarizing the steps for lighting the pilot with an digital igniter:
| Step | Motion |
|---|---|
| 1 | Flip off fuel provide. |
| 2 | Discover the pilot meeting. |
| 3 | Flip the igniter change to “On”. |
| 4 | Press and maintain the reset button for 30 seconds. |
| 5 | Observe the pilot flame. |
Adjusting the Pilot Flame
As soon as you’ve got efficiently lit the pilot flame, it is vital to regulate it for optimum efficiency. Listed below are the steps to take action:
1. Flip On the Gasoline Valve
Find the fuel valve on the furnace and switch it on by turning it counterclockwise. You must hear a clicking sound because the fuel flows into the pilot meeting.
2. Mild the Pilot Flame
Observe the directions within the earlier part to mild the pilot flame utilizing a long-reach lighter or match. Maintain the flame close to the pilot orifice till the burner lights up.
3. Modify the Pilot Flame
Find the pilot adjustment screw close to the pilot burner. It is usually a small screw with a slotted or Phillips head.
4. Use a Screwdriver
Utilizing a screwdriver, gently flip the pilot adjustment screw clockwise or counterclockwise till the pilot flame is roughly 3/4 inches lengthy. That is the optimum flame measurement for many furnaces.
5. Verify the Flame Shade
The pilot flame needs to be blue in colour. A yellow or orange flame signifies incomplete combustion and needs to be adjusted till it burns blue.
6. Observe the Flame Stability
The pilot flame needs to be steady and steady. If it glints or goes out intermittently, it could point out a fuel provide situation or different issues with the furnace. On this case, it is best to name a certified technician for inspection and restore.
| Pilot Flame Shade | Indication |
|---|---|
| Blue | Optimum combustion |
| Yellow/Orange | Incomplete combustion, regulate flame |
Relighting a Extinguished Pilot
In case your furnace’s pilot mild has gone out, you possibly can relight it your self by following these steps:
1. Flip off the fuel provide to the furnace.
2. Wait 5 minutes for the fuel to dissipate.
3. Find the pilot mild meeting.
4. Push within the reset button.
5. Maintain down the ignition button and lightweight the pilot mild with a match or lighter.
6. Launch the ignition button and maintain the reset button for 30 seconds.
7. Activate the fuel provide to the furnace.
If the pilot mild stays lit, your furnace is able to use. If the pilot mild goes out once more, there could also be an issue with the furnace that must be repaired by a certified technician.
| Potential Causes of Pilot Mild Extinguishment | Options |
|---|---|
|
Clogged or soiled pilot mild orifice |
Clear the orifice with a small brush or wire. |
|
Defective thermocouple or thermopile |
Substitute the thermocouple or thermopile. |
|
Blocked fuel line |
Clear the blockage from the fuel line. |
Learn how to Mild Pilot on Furnace
1. **Find the pilot mild meeting.** It’s normally positioned close to the underside of the furnace.
2. **Flip off the fuel provide to the furnace.** That is normally finished by turning a valve positioned close to the fuel meter.
3. **Wait a couple of minutes for the fuel to dissipate.** This can assist to stop an explosion.
4. **Use an extended lighter or match to mild the pilot mild.** Maintain the flame close to the pilot mild meeting and activate the fuel provide.
5. **Hold the flame on the pilot mild for about 30 seconds.** This can permit the pilot mild to ignite and keep lit.
6. **Activate the furnace.** The furnace ought to now begin to warmth up.
Troubleshooting Widespread Pilot Mild Points
8. The pilot mild will not keep lit.
**Potential causes:**
- The thermocouple is soiled or broken.
- The fuel provide just isn’t turned on all the way in which.
- The pilot mild meeting just isn’t correctly adjusted.
Options:
- Clear or substitute the thermocouple.
- Activate the fuel provide all the way in which.
- Modify the pilot mild meeting in accordance with the producer’s directions.
In case you are having hassle lighting the pilot mild in your furnace, you will need to name a certified technician. A technician can diagnose the issue and ensure that your furnace is working safely.
Security Precautions for Lighting a Pilot Mild
Earlier than making an attempt to mild a pilot mild, make sure you comply with these essential security precautions to reduce dangers:
1. Verify for Gasoline Leaks
Previous to igniting the pilot mild, examine all fuel traces and connections for any leaks. Use a soapy water resolution and apply it to the suspected areas. Bubbles point out a leak, requiring instant restore by a certified technician.
2. Clear Obstructions
Confirm that the pilot meeting and its environment are free from particles or blockages. Guarantee there’s correct airflow to facilitate ignition.
3. Ventilate the Space
Open home windows and doorways to make sure sufficient air flow in the course of the lighting course of. This prevents fuel accumulation and potential hazards.
4. Extinguish Flames
Guarantee there aren’t any open flames or smoking supplies close to the pilot mild space. Exterminate any potential sources of ignition.
5. Apply Warning
By no means try to mild a pilot mild in case you are inexperienced or have any doubts. Search help from a certified technician.
6. Defend Your self
Put on applicable security gear resembling gloves and security glasses to guard towards potential sparks or sizzling surfaces.
7. Observe Producer’s Directions
Confer with the producer’s directions for particular procedures on lighting the pilot mild in your explicit furnace mannequin.
8. Use the Appropriate Instruments
Make use of the suitable instruments for igniting the pilot mild, resembling a long-reach lighter or a spark igniter.
9. Lighting the Pilot Mild
Observe these detailed steps to soundly mild the pilot mild:
- Find the fuel management valve and switch it to the “Off” place.
- Find the pilot meeting and the ignition button.
- Depress the ignition button and maintain it whereas concurrently opening the fuel management valve barely.
- Observe the pilot mild via the viewing window and ensure if it ignites.
- Hold the ignition button depressed for about 30 seconds to permit the thermopile to warmth up.
- Launch the ignition button and examine if the pilot mild stays lit.
- If the pilot mild extinguishes after releasing the ignition button, fastidiously repeat steps 4-6.
- If unsuccessful after a number of makes an attempt, contact a certified technician for help.
- As soon as the pilot mild is lit, regulate the fuel management valve to the specified flame peak.
Bear in mind to comply with these security precautions and lighting directions diligently to reduce dangers and make sure the secure and environment friendly operation of your furnace.
Examine and Clear
Usually examine the pilot meeting for any dust, particles, or corrosion. Clear the thermocouple and pilot tube utilizing a gentle brush or compressed air. This helps guarantee correct fuel move and ignition.
Verify Gasoline Stress
Utilizing a manometer, measure the fuel stress on the pilot mild. It needs to be inside the specified vary in your furnace. If the stress is simply too low or excessive, regulate it accordingly to make sure optimum flame stability.
Clear Obstructions
Be sure that there aren’t any obstructions blocking the air consumption or exhaust vents of the furnace. Clear any particles or mud that will hinder correct air circulation and stop the pilot mild from staying lit.
Keep Correct Airflow
Satisfactory airflow is essential for a steady pilot mild. Examine and clear the blower motor and filter to make sure they’re functioning correctly and offering adequate air circulation all through the system.
Tighten Connections
Over time, connections can grow to be free, inflicting fuel leaks and interfering with the pilot mild. Tighten all fuel line connections, together with these on the pilot meeting, fuel valve, and thermocouple.
Substitute Thermocouple
The thermocouple generates a small electrical present that retains the fuel valve open. If the thermocouple fails, the fuel valve is not going to open, and the pilot mild will exit. Substitute the thermocouple if it turns into defective.
Modify Pilot Flame
The pilot flame needs to be a small, regular blue flame. If the flame is simply too massive, it could possibly overheat the thermocouple, inflicting it to fail. If the flame is simply too small, it could not generate sufficient present to maintain the fuel valve open. Modify the pilot flame utilizing the adjustment screw on the fuel valve.
Examine Warmth Exchanger
A cracked or broken warmth exchanger can launch harmful carbon monoxide into the air. Periodically examine the warmth exchanger for any cracks or leaks, and have it repaired or changed if needed.
Use Authorized Gasoline
Solely use the kind of gasoline specified within the furnace guide. Utilizing an incompatible gasoline can injury the pilot meeting and result in combustion issues.
Name a Certified Technician
In case you are uncomfortable performing any of those duties or encounter any difficulties, it’s advisable to contact a certified HVAC technician who can safely and successfully preserve your furnace’s pilot mild.
How To Mild Pilot On Furnace
In case your furnace just isn’t working, one of many first issues it’s best to examine is the pilot mild. The pilot mild is a small flame that ignites the fuel in your furnace. If the pilot mild just isn’t lit, your furnace won’t be able to supply warmth.
To mild the pilot mild, you will want an extended match or a lighter. First, find the pilot mild meeting. It’s normally positioned on the backside of the furnace. Upon getting discovered the pilot mild meeting, flip the fuel valve to the "off" place. This can cease the move of fuel to the pilot mild.
Subsequent, use the lengthy match or lighter to ignite the pilot mild. Maintain the match or lighter as much as the pilot mild and switch the fuel valve to the "on" place. The pilot mild ought to ignite instantly. If it doesn’t ignite, strive once more.
As soon as the pilot mild is lit, flip the thermostat to the specified temperature. The furnace will now begin to produce warmth.
Individuals Additionally Ask
How do I do know if my furnace pilot mild is out?
In case your furnace just isn’t producing warmth, the pilot mild could also be out. You may examine the pilot mild by trying via the sight glass on the furnace. If the pilot mild just isn’t lit, it should seem darkish.
Why will not my furnace pilot mild keep lit?
There are a couple of the explanation why your furnace pilot mild could not keep lit. One motive is that the thermocouple could also be defective. The thermocouple is a tool that senses the presence of the pilot mild and sends a sign to the fuel valve. If the thermocouple is defective, it won’t be able to ship a sign to the fuel valve, and the fuel valve will shut off the move of fuel to the pilot mild.
One more reason why your furnace pilot mild could not keep lit is that the fuel stress could also be too low. If the fuel stress is simply too low, the pilot mild won’t be able to remain lit. You may examine the fuel stress through the use of a manometer.
Lastly, your furnace pilot mild could not keep lit if the venturi tube is clogged. The venturi tube is a small tube that mixes air with fuel. If the venturi tube is clogged, the pilot mild won’t be able to get sufficient air to remain lit. You may clear the venturi tube through the use of a small brush.
